Free Shipping Over $50
Free Shipping Over $50
Cart 0

Snow Foam Cannon Directions of Use

Snow foaming is the perfect pre-wash to dramatically reduce swirl marks and micro scratches when washing. Follow these quick and easy instructions to make the most of the lance and our snow foam detergent.

  • Tightly screw on the provided adapter to the nozzle and attach the hose.
  • Fill the bottle with 980ml of water and 20ml of the included snow foam detergent.
  • Screw the nozzle onto the bottle and shake it well.
  • Attach the cannon to your pressure washer securely by pushing it in and twisting.
  • Cover your car completely with one layer of foam then wait at least two minutes before rinsing off. 
  • Foam again and wash with mitt for a more thorough wash. 
  • If using Hydrophobic snow foam, shoot 50ml of foam on a clean car only. Let it dwell for one minute and rinse off. 

Run clean water through the cannon after each use to prevent clogging due to soap build-up. 

Older Post Newer Post

Leave a comment

Please note, comments must be approved before they are published